Tips to bind and scallop bathroom accessories and towels
February 17, 2011 by admin
Filed under Bathroom accessories, Guide
Now you have your terry towels, designed by hand sewing, that is, they can bind and add scallops. Before we start, you need to buy a plain terry towel, bath towel or a choice. Preferably you want to choose washable fabric, medium-weight material. Consider taffeta, satin or polyester.
To create and bind shell:
Once you create your collected materials, (a) use tissue paper to the edge of your scallops. When you draw the edge of the scallops, add an odd number in the pattern, particularly remarkable enough to create a curve. Make a 1 inch depth, starting at the bottom point and working towards climax. Now with your fabric in your hand, attach the towel, with craft pins. Next, use rotary cutters, or sewing scissors to trim the edges of the scallops.
(2) Use your rotary cutters to cut and / or scissors of the seaming tape and start piecing the strips, joining, so it creates bind your stripes. Lengthwise, press your tapes until it folded in half and left on the page. Avoid misleading the width of your belt.
(3) next on the right side of the fabric, pin-stripe tie. (4) Sparse darn quarter of an inch from the raw edges. (5) towards the lower boundary or edge, press the narrow piece. About the fabric, fold the ends of binding to the side of your cloth. Press your wrap and bind over the border / edges of your scallop and secure it with pins. Make sure that the pins fit into the ditch of the seam. (6) On the seams begin digging toward the right level. On the left plane, stitch, bind with the capture system.
You have your scallops and binding to the beginning of the creation of your ornamental and embellished towels is complete. Towels make great bathroom accessories, as to extend the colors of your surroundings. Now you are ready to add to bands and lace trim your towel.
How to create bands:
To formulate strips you need a different level or plain towel. Here, too, want you to examine textiles, you can wash with the machine. Polyester is good, like satin or taffeta. Select medium-weight cloth. (1) As from the edge of your fabric, a strip cut from your towel. You want to make the width of the tape to three times smaller in width than the finished width. Next, use the Rotary trimmers or sewage scissors and cut one-inch strip to cover a considerable distance as your latitude. (2) down to the right, put your stripes on the substance and level: Once you finish ironing distort the surface to avoid or stretching your fabric and press the air. Press, so it balances with the bandwidth. (3) On the opposite side, aloft press: press the boundaries of the strip, the edges between forces and balancing the width of the finished work. At the upper layers, and the rough edges, press the edge, if not join the two. (4) About half an inch, press the cloth on the narrow ends of the hem.
Do not stretch your material. Secure the border strip with pins in the position of choice. On the outer edges of the fabric, sewing and start bending the narrow piece. Darn your fabric on each side of your cloth, cap, and sew the ends: Next, stitch your lace and serger.
Related Blogs
- Related Blogs on Tips to bind and scallop bathroom accessories and towels
